Question: How Do You Smooth A Concrete Garage Floor?

Can you smooth concrete after it dries?

There are basically two methods used to smooth off hardened concrete surfaces.

They are dry grinding and wet rubbing.

Dry grinding is done of dry concrete surfaces to remove fins and marks caused by forms.

The water, plus the rubbing action, brings up a cement paste which results in a very smooth, plaster-like surface..

Can I sand concrete smooth?

You can basically sand any type of concrete surfaces, regardless of whether it is a countertop, a floor, a wall, or a decorative object. However, be aware that you will need the right tools for the job: you can sand small and comparatively smooth surfaces by hand with regular or diamond sandpaper.

Can I use a sander on concrete?

An orbital sander is the correct equipment to use when sanding concrete. You will want to have several different grit sizes of orbital sanding discs on hand. … To remove only a small rough patch or uneven area, you can use 1000-grit automobile black sandpaper, which is very fine and will not remove much of the concrete.

What kind of sander do you use for concrete floors?

If you only have a small area to sand, you can also use a palm sander, orbital sander or belt sander. Rough imperfections may require the use of a special diamond disc and a concrete floor grinder.

What is the smoothest concrete mix?

The ratio is typically 1 part cement to 3 parts sand and water of course. The trick to getting a smooth final surface starts after its poured and before it sets. You will need to create or purchase a float that will be used to produce the smooth finish.

Can you sand concrete with regular sandpaper?

You can basically sand any type of concrete surfaces, regardless of whether it is a countertop, a floor, a wall, or a decorative object. However, be aware that you will need the right tools for the job: you can sand small and comparatively smooth surfaces by hand with regular or diamond sandpaper.

What do you use to smooth concrete?

Smooth the surface with a steel trowel after it’s partially hardened. Hold the trowel almost flat and swing it in large overlapping arcs while applying pressure. Float the concrete when you’re done grooving and edging (Photo 6).

How do you sand a concrete floor for painting?

Using the coarsest grade of concrete sandpaper, grind or sand the entire surface. Make sure to keep your pressure even. When using a grinder, keep it level to avoid an uneven finish. Note that concrete polishers require a constant supply of water to get good results.

How do you sand a concrete floor by hand?

Attach 180-grit sandpaper, which is a fine grit, to a pole sander, hand sander or floor sander. Put on a respirator, and sand the entire surface of the floor lightly. When the sheen is off the surface, scuff sanding is complete.

When should I brush my concrete?

When it comes to brooming, timing is critical—brush too early and the surface will be weak, brush too late and there won’t be enough texture. It must be done while the slab is still soft, but after the bleed water has dissipated. Depending on the weather, this can take anywhere from 20 minutes to 4 hours.